All Carpenter, Rigging & Safety

5/16" Hand held T-handle wrench for Roto-Locks. Only 6" long.

Super strength and only 5/8" in diameter. If your needs require a super strength line, maybe this is for you. Tensile strength is rated at 12,200 lbs. At a 5% safety factor, that's a safe working load of 610 lbs. Order by the foot. Available in Black only.

Carpenters square with circle center finder and protractor.

When safety is paramount, this Petzl aluminum caribiner will never accidentally open. Requires a press of the green button and a twist of the collar to open. Won't open by rope friction, etc. which is a problem with many other locking 'biners. This is a personal favorite of mine.
Rated at 5000 lbs.

Huge hook similar to the fireman's hook with two differences. The gate, while still opening to large capapcity size down not swing outward to the side but straight against the opposite side. The auto-lock is spring loaded and locks as it's being closed. Also fits around stage pipes and largest truss members.

RigRight CD w/ manual (on disk) and Reference Cards Here's a computer program that computes and adjusts rigging geometry and forces, calculates positions, lengths, and forces for bridles, breastlines and deadhangs. It manages any number of loads simultaneously, of any weight and at any location, rigged from beams at any location. It does solutions in both 2 and 3 dimensions. Individual solutions can be adjusted to fit a particular situation. It supports files of beams and show rigging points. Solutions can be viewed individually, printed, recorded, and exported in spreadsheet form singly or as part of a group. What comes with the software? You get two laminated reference cards, RigRight 1.0 on CD, and a comprehensive manual (on disk) and the software key.. System Requirements: RigRight 1.0 is a windows program.. It needs 20 MB of RAM, 10 MB space on the hard drive, and a screen resolution of 800 x 600 or higher. #54531 RigRight CD w/manual, Ref. cards and key $499.95

What comes with the software? You get the Complete Rigging System, consisting of the 710-page book Entertainment Rigging, two laminated reference cards, RigRight 1.0 on CD, and a comprehensive 87-page manual.

Here's a computer program that computes and adjusts rigging geometry and forces, calculates positions, lengths, and forces for bridles, breastlines and deadhangs. It manages any number of loads simultaneously, of any weight and at any location, rigged from beams at any location. It does solutions in both 2 and 3 dimensions. Individual solutions can be adjusted to fit a particular situation. It supports files of beams and show rigging points. Solutions can be viewed individually, printed, recorded, and exported in spreadsheet form singly or as part of a group.

System Requirements: RigRight 1.0 runs in Windows 98, 2000, and XP. It needs 20 MB of RAM, 10 MB space on the hard drive, and a screen resolution of 800 x 600 or higher. You must own the "Entertainment Rigging" book to purchase the CD.

This is the hammer that's been in my tool bag for the last 25 years. My father carried an Estwing for as long as I can remember. While some may prefer a wooden handle I really like the slim, but indestructible features of the Estwing hammer.

Steel Head and Steel Shank wrapped with genuine leather for the grip.

16 oz. straight claw Estwing for stage work.