Tools for Stagecraft


Local Time:

Felco Cutters

  • felco c7 makes clean cuts in wire rope up to 3/16 inch diameter
    Felco C7 Steel Cable Cutter$69.95
    The best steel cable cutter ever. One-handed operation. This is another industry standard tool. There's no sense in buying a cable cutter that's not going to last or cut steel cable cleanly. The Felco is the best you can get.

    Unique triangular jaws never leave a frayed cut. Hardened steel blades and center bolt.

    Cuts wire rope up to 1/4 inch or 7 mm thick, high tensile steel strands up to 5 mm thick, stainless steel strands up to 4 mm, extra tough wire rope or stands up to 3 mm. Cuts electric cables of copper, aluminum or steel-cored aluminum up to 7 mm. Cuts aluminum or copper rods up to 5 mm diameter, steel rods up to 4 mm and tempered steel spring wire up to 2 mm. Length 7 1/4 inches. Weight 9.5 ounces.
    Qty:
  • felco c9 makes clean cuts in wire rope up to 3/8 inch diameter
    Felco C9 steel cable cutter$199.95
    Felco invented the "triangular cut". Research shows that this system of forming the blades into a triangle while cutting allows wire rope to be cut without being crushed. Hardened steel blades and center bolt, unbreakable forged aluminum alloy handles with plastic covering for good grip.

    Cuts wire rope up to 3/8 inch or 9 mm thick, high tensile steel strands up to 7 mm thick, stainless steel strands up to 6 mm, extra tough wire rope or stands up to 5 mm. Cuts electric cables of copper, aluminum or steel-cored aluminum up to 9 mm. Cuts aluminum or copper rods up to 9 mm diameter, steel rods up to 7 mm and tempered steel spring wire up to 4 mm.

    Length 13 inches. Weight 26.5 ounces.
    Qty:
  • felco c12 makes clean cuts in wire rope up to 9/16 inch diameter
    Felco C12 Cable Cutter$309.95
    The Felco C12 two-hand cutter is recommended for cutting steel cable up to 1/2 inch in diameter or 12 mm thick, high tensile steel strands up to 8 mm thick, stainless steel strands up to 6 mm, extra tough wire rope or stands up to 5 mm. Cuts electric cables of copper, aluminum or steel-cored aluminum up to 12 mm. Cuts aluminum or copper rods up to 10 mm diameter, steel rods up to 8 mm and tempered steel spring wire up to 4 mm. Enjoy the optimum cutting yield thanks to the shape of the handles and special steel blades. The C12 is a cutting tool capable of satisfying the most varied industrial requirements. Hardened steel blades and center bolt, unbreakable forged aluminum alloy handles with plastic covering for good grip.

    Weight 3 pounds. Length 19 inches.
    Qty:
  • felco c16 makes clean cuts in wire rope up to 5/8 inch diameter
    Felco C16 steel cable cutter$449.95
    The Felco C16 two-hand cutter is recommended for cutting steel cable up to 5/8 inch in diameter or 16 mm thick, high tensile steel strands up to 14 mm thick, stainless steel strands up to 7 mm, extra tough wire rope or stands up to 6 mm. Cuts electric cables of copper, aluminum or steel-cored aluminum up to 16 mm. Cuts aluminum or copper rods up to 14 mm diameter, steel rods up to 10 mm and tempered steel spring wire up to 5 mm. Enjoy the optimum cutting yield thanks to the shape of the handles and special steel blades. The C16 is a cutting tool capable of satisfying the most varied industrial requirements. Hardened steel blades and center bolt, unbreakable forged aluminum alloy handles with plastic covering for good grip.

    Weight 5 pounds. Length 23 inches.
    Qty: